Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modeling thin film structure with spring foundation.
Posted Apr 10, 2018, 4:34 p.m. EDT Structural & Acoustics, Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
Hi, I'm going to model thin film structure to do mode analysis.
I want to see the mode shape of the top of the thin film. I need your help.
My model information is as follows
Substrate : 5mm * 5mm * 750[um]
Thin film : 5mm * 5mm * 100[nm]
Between substrate and thin film, I'm going to put sping foundation.
And then fix the bottom of substrate, do mode analysis.
Right now, I'm using solid mechanics. However, other people said that shell or membrane is better. If it does, could you let me know how to model with shell or membrane?
PS. If you need more information, I'll give it to you as much as possible.
-------------------Jongsung Kim
Attachments:
Hello Jongsung Kim
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.