Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Bending a dipole magnet in COMSOL

Posted May 7, 2018, 9:05 p.m. EDT Low-Frequency Electromagnetics, Geometry, Modeling Tools & Definitions Version 5.2a 1 Reply

Divya Prasaath Sankar Selvaraj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all, I'm new to COMSOL and I.m trying to simulate a geometry for a dipole magnet by bending it and I'm finding it quite challenging. Can anyone one guide me on this? Thanks in advance.

1 Reply Last Post May 8, 2018, 11:29 a.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago May 8, 2018, 11:29 a.m. EDT

I'm confused. Are you trying to model a bent magnet? For example, are you trying to model a so-called "horseshoe" or U-shaped magnet? Or did you mean something else in saying "by bending it"? I suggest that you post a picture of what you are trying to model.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
I'm confused. Are you trying to model a bent magnet? For example, are you trying to model a so-called "horseshoe" or U-shaped magnet? Or did you mean something else in saying "by bending it"? I suggest that you post a picture of what you are trying to model.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content