Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Integration formula

Posted May 10, 2011, 12:33 p.m. EDT Heat Transfer & Phase Change Version 3.5a 3 Replies

Yaseen Al Waaly
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I am modelling a heat exchanger problem. I have good validation with experimental data. How can I get the value of the integration for any variable (such as the temperature) along any line rather than the edges of the domain?
Thanks
3 Replies Last Post May 11, 2011, 10:21 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 10, 2011, 1:29 p.m. EDT
Hi

you have also the "cut line option" in 3.5, it is in one of the options of the postprocessing tab, unfortunately I do no longer have a running version, check the doc

--
Good luck
Ivar
Hi you have also the "cut line option" in 3.5, it is in one of the options of the postprocessing tab, unfortunately I do no longer have a running version, check the doc -- Good luck Ivar
Yaseen Al Waaly
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 11, 2011, 10:19 a.m. EDT
Thanks
What about the other versions.
Thanks What about the other versions.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 11, 2011, 10:21 a.m. EDT
Hi

many more in V4, check the right click on the data set node, AND check your doc ;)

--
Good luck
Ivar
Hi many more in V4, check the right click on the data set node, AND check your doc ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content