Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tokamak with comsol

Posted May 23, 2011, 8:59 a.m. EDT Low-Frequency Electromagnetics Version 4.1, Version 4.2 2 Replies

Isabel Gil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear COMSOL users,

My final goal is to simulate a complete Tokamak reactor. But, obviously, I want to create the total model little by little.

I think the best first approximation is using 2D axisymmetric model.

I would be really grateful if someone could provide me with some literature where it is explained, more or less, how to get it using COMSOL since I am a little confused.

Thanks in advance.

Best regards,
Isa

2 Replies Last Post May 30, 2011, 3:50 a.m. EDT
Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 30, 2011, 3:38 a.m. EDT
Contact your COMSOL representative and ask for model id 23.
kind regards
Niklas Rom


Dear COMSOL users,

My final goal is to simulate a complete Tokamak reactor. But, obviously, I want to create the total model little by little.

I think the best first approximation is using 2D axisymmetric model.

I would be really grateful if someone could provide me with some literature where it is explained, more or less, how to get it using COMSOL since I am a little confused.

Thanks in advance.

Best regards,
Isa





--
Niklas
Contact your COMSOL representative and ask for model id 23. kind regards Niklas Rom [QUOTE] Dear COMSOL users, My final goal is to simulate a complete Tokamak reactor. But, obviously, I want to create the total model little by little. I think the best first approximation is using 2D axisymmetric model. I would be really grateful if someone could provide me with some literature where it is explained, more or less, how to get it using COMSOL since I am a little confused. Thanks in advance. Best regards, Isa [/QUOTE] -- Niklas
Isabel Gil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 30, 2011, 3:50 a.m. EDT
Thank-you Niklas.

But I don't know what you mean with "model id 23"?
And about COMSOL representative, do you mean the person who sent me the COMSOL licence?

Thanks again.

Best regards,
Isa
Thank-you Niklas. But I don't know what you mean with "model id 23"? And about COMSOL representative, do you mean the person who sent me the COMSOL licence? Thanks again. Best regards, Isa

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content