Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Adaptive Mesh Refinement

Posted May 26, 2011, 3:36 a.m. EDT Low-Frequency Electromagnetics, Computational Fluid Dynamics (CFD), Mesh, Studies & Solvers Version 4.1 1 Reply

mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

what does the error message

Invalid degree of freedom in property Solcomp.

mean, when I try to use adaptive mesh refinement in a MHD application (solving for T, A V psi, and u p in 3 segregated groups)


Regards, Marcel
1 Reply Last Post May 26, 2011, 5:05 a.m. EDT
mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 26, 2011, 5:05 a.m. EDT
Hi again,

the problem only occurs when I try to use the adaptive mesh routine for the coupled problem of AC/DC and fluid flow. For NITF alone, it works perfectly.
Hi again, the problem only occurs when I try to use the adaptive mesh routine for the coupled problem of AC/DC and fluid flow. For NITF alone, it works perfectly.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content