Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Creating new boundary conditions.

Posted Jun 8, 2011, 2:36 p.m. EDT Fluid & Heat Version 4.0a 1 Reply

Ryan Schirmer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For the model I am currently working on, I need a laminar flow boundary condition in which the pressure gradient remains zero along the length of the surface. Is it possible to create my own BCs or am I stuck with the predefined ones?
1 Reply Last Post Jun 9, 2011, 3:57 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 9, 2011, 3:57 a.m. EDT
Hi

you can use the additional weak conditions at will to add everything you can express in vali equations ;)

(you might need to turn on the Preferences - show "Advanced Physics interface options"

--
Good luck
Ivar
Hi you can use the additional weak conditions at will to add everything you can express in vali equations ;) (you might need to turn on the Preferences - show "Advanced Physics interface options" -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content