Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Time domain variables

Posted Jun 28, 2011, 12:41 p.m. EDT Version 4.2 0 Replies

Rob McIntosh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Does anyone have suggestions on how to couple a variable produced by one time dependent model into a different model that is defined on a different time interval?

I am working on a time dependent simulation of two different physics types and coupling a few variables from model one to model two. One physics type is in model 1 and another in model 2.

I would like the first to simulate through a few time cycles before the second starts simulating and coupling with the first model.

For example model one simulates from 0 to 5 seconds and model two from 4 to 5 seconds. So basically the model two will actually simulate from 0 to 1 second but coupling will only occur from time 4-5 of model 1.

Thank you
0 Replies Last Post Jun 28, 2011, 12:41 p.m. EDT
COMSOL Moderator

Hello Rob McIntosh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content