Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

series of cut plane integrations

Posted Jul 3, 2011, 6:30 a.m. EDT Results & Visualization Version 4.1, Version 4.2 1 Reply

David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I'd like to do a series of parallel cut- plane integrations in my 3D model, say a table of 50 integrations on 50 cut planes spaced apart by a given interval.
Is that possible?

thanks

David
1 Reply Last Post Aug 7, 2011, 12:27 p.m. EDT
COMSOL Moderator

Hello David Segal

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

chrisv
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 7, 2011, 12:27 p.m. EDT
Any success?

I have a similar question. I need to evaluate a line integral around a closed loop (easily done). Next, I would like to evaluate this at different distances from the origin.

For example, define a circle parallel to the x-y plane at some distance z'. Change z' and evaluate the line integral. Plot as a function of z'.

There's no need for a parametric sweep since the solution will always be the same.
Any success? I have a similar question. I need to evaluate a line integral around a closed loop (easily done). Next, I would like to evaluate this at different distances from the origin. For example, define a circle parallel to the x-y plane at some distance z'. Change z' and evaluate the line integral. Plot as a function of z'. There's no need for a parametric sweep since the solution will always be the same.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content