Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tumor- boundary condition

Posted Sep 12, 2018, 11:09 a.m. EDT 1 Reply

Mohammad Rahimi-Gorji
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

The below post is related to an archived discussion

Hi, I wanna simulate and analyze a tumor in COMSOL. I am a little confused about the boundary condition and some other aspects. Is there anyone can help me?

1 Reply Last Post Sep 23, 2018, 11:22 a.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Sep 23, 2018, 11:22 a.m. EDT

My advice: I wouldn't apply any specific boundary conditions to a tumor (except the default continuity ones, which the code does automatically). I would apply the physical (volume, not surface) properties to the tumor, and then model the tumor within a larger problem space (presumably the tissue containing the tumor).

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
My advice: I wouldn't apply any specific boundary conditions to a tumor (except the default continuity ones, which the code does automatically). I would apply the physical (volume, not surface) properties to the tumor, and then model the tumor within a larger problem space (presumably the tissue containing the tumor).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content