Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to create such a mesh?

Posted Jul 18, 2011, 7:49 p.m. EDT Geometry Version 4.1 2 Replies

Sebastian Gatzka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello World.

I'm struggeling creating a mesh like the one in the attachment.
In version 3.5a I used edge element distribution but in the new version I failed.
COMSOL states: "There is no feature using these settings." when entering any distribution settings.

Any ideas? Do you need any more information?

Thanks, Sebastian

Attachments:

2 Replies Last Post Sep 16, 2011, 9:26 a.m. EDT
Sebastian Gatzka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 21, 2011, 12:22 p.m. EDT
For everyone who is interessted in the soultion to this problem.
I forgot to specify a type of mesh (mappe, free) and so there was no feature (in this case the mesh type) using a distribution.
For everyone who is interessted in the soultion to this problem. I forgot to specify a type of mesh (mappe, free) and so there was no feature (in this case the mesh type) using a distribution.
Richa Kumari
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 16, 2011, 9:26 a.m. EDT
absolutely correct igot it..thanksa lot....
absolutely correct igot it..thanksa lot....

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content