Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
LINKING GEOMETRIES
Posted Aug 11, 2011, 7:59 p.m. EDT Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
HI I'M CURENTLY WORKING IN COMSOL A VOLTAGE DIVIDER SIMULATION BUT IT ISN'T RUN, IT MIGHT BE CAUSE THE MODEL IS SO BIG FOR MY COMPUTER CAPACITY.
IF I COULD LINK SEVERAL AXISYMETRIC MODELS WITH 3D MODELS, EVERYTHING WILL BE EASIER.
PD:I'VE HEARD I COULD MAKE A LIKING WITH MODELS IN ANOTHER DISCUSSION BOX BUT I DIDN,T KNOW HOW CAN I DO IT
IF I COULD LINK SEVERAL AXISYMETRIC MODELS WITH 3D MODELS, EVERYTHING WILL BE EASIER.
PD:I'VE HEARD I COULD MAKE A LIKING WITH MODELS IN ANOTHER DISCUSSION BOX BUT I DIDN,T KNOW HOW CAN I DO IT
1 Reply Last Post Aug 13, 2011, 1:29 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the best advise I can give is to check the features of the Definitions - Coupling variables
and test it out on simple examples, there are afew in the Model librry
--
Good luck
Ivar
the best advise I can give is to check the features of the Definitions - Coupling variables
and test it out on simple examples, there are afew in the Model librry
--
Good luck
Ivar