Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

BC convergence criterium or Stop condition

Please login with a confirmed email address before reporting spam

Hi to all,

i'm trying to solve a problem of heat transfer in porous medium in non local thermal equilibrium.

I use 2 ht modules linked by a source term to compute fluid and solid phase equations.

This model is ok when i use a BC like Tf=Ts=cost.

Now i want to apply this condition:

On fluid phase an heat flux: 100[W/m^2]-ht2.tfluxx where ht2fluxx is the flux on solid phase and is unknown.

On solid phase Tf=Ts where Tf=Ts is unknown

The model runs and reach a solution.

When I check this one i should find that ht.tfluxx+ht2.tfluxx=100 W/m2 indeed i find 90 W/m2.

So i would personalize a convergence criterium on BC or use a stop condition...i don't know.

I tried to use finer meshes and strong tolerance to check convergece (1e-10) but this unbalance still remain.

Thanks in advance.

Paolo

1 Reply Last Post Dec 11, 2013, 3:02 p.m. EST
COMSOL Moderator

Hello Paolo Mesolella

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 11, 2013, 3:02 p.m. EST
Hi Paolo,

I'm trying to apply local thermal non-equilibrium as well, but I would like to relate Ts and Tf in both equations by a heat loss in the source therm. For example h(Ts-Tf) for the energy equation for solid phase and h(Tf-Ts) for the energy equation for fluid phase. But I'm getting some problems about boundary conditions.

Do you have any idea about how to relate Tf and Ts?

Thanks

Marco
Hi Paolo, I'm trying to apply local thermal non-equilibrium as well, but I would like to relate Ts and Tf in both equations by a heat loss in the source therm. For example h(Ts-Tf) for the energy equation for solid phase and h(Tf-Ts) for the energy equation for fluid phase. But I'm getting some problems about boundary conditions. Do you have any idea about how to relate Tf and Ts? Thanks Marco

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.