Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Geometry generation

Posted Aug 31, 2011, 9:47 a.m. EDT Geometry Version 4.1, Version 4.2 1 Reply

mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

is there any feature in COMSOL to read coordinates from an ASCII file to create a polygon or any other geometric entity?


Best regards
1 Reply Last Post Aug 31, 2011, 10:21 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 31, 2011, 10:21 a.m. EDT
Hi

for a surface yes, there is a few threads and matlab, as well as GUI I/F hints on the form, try a search

--
Good luck
Ivar
Hi for a surface yes, there is a few threads and matlab, as well as GUI I/F hints on the form, try a search -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content