Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Deformed Geometry + Chemistry

Please login with a confirmed email address before reporting spam

Hello,

I am working on a model which describes a chemical dissolution process. My idea was to use the chemistry module which calculates the kinetic data of the surface reaction and couple it with the deformed geometry and transport of diluted species modules. The chem and tds module with flux boundary conditions communicate just fine. But there seems to be a problem with the dg module as the solution does not converge. It does if I put some number into the Prescribed Normal Mesh Velocity box. What could be the reason?

Thanks


1 Reply Last Post Feb 19, 2019, 4:09 a.m. EST

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Feb 19, 2019, 4:09 a.m. EST

I solved the issue by adjusting the mesh type and remeshing in an appropriate way.

I solved the issue by adjusting the mesh type and remeshing in an appropriate way.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.