Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Logic functions
Posted Oct 6, 2011, 7:44 a.m. EDT Heat Transfer & Phase Change Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
I am new to comsol, and I am making a 2d model of a tank exposed to a heat flux on the top plate, in order to heat a phase changing material inside the tank. Fins are used to enchance the heat transfer.
My problems is:
How do I define the special solar salt I am filling the tank with (a mix of KNO3 and NaNO3)? More precisely; I want to use logic functions so that the Cp-value is changing depending on the temperature of the salt. (for T<110, Cp=0.75 etc) Where can I do that?
Thank you in advance,
Marie.
My problems is:
How do I define the special solar salt I am filling the tank with (a mix of KNO3 and NaNO3)? More precisely; I want to use logic functions so that the Cp-value is changing depending on the temperature of the salt. (for T<110, Cp=0.75 etc) Where can I do that?
Thank you in advance,
Marie.
1 Reply Last Post Oct 6, 2011, 8:50 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
The ansfer to your question can be found on COMSOL Multiphysics User's Guide, Version 4.2 (pdf file, pages 150-151).
Best regards,
Andrzej
The ansfer to your question can be found on COMSOL Multiphysics User's Guide, Version 4.2 (pdf file, pages 150-151).
Best regards,
Andrzej