Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Laser heating of a plate
Posted Mar 19, 2019, 9:38 a.m. EDT Heat Transfer & Phase Change Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hey,
im new to Comsol and i want to simulate laser-heating a plate. I used the laser_heating_wafer.mph model as a guideline. But when i change the parameter of the laser-beam-radius to something like 50µm (focus diameter of the laser im using for the expirment is 100µm), the T_max and T_min values are completely useless (see screenshot). I deleted the movement of the wafer and adjusted the parameters for the test-setup im using. With the simulation i want to see how high the max temperature of the plate is so i can design a proper isolation to prevent heat-transfer.
Thank you!
Attachments:
Hello Irfan Kilinc
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.