Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Corona discharge in COMSOL
Posted Apr 24, 2019, 1:48 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
Hello guys, I just started to learn COMSOL, and I found a weird thing that makes me confuse a lot. I was trying to simulate the plating on the cathode and checking the corona discharge. First, I made a cone structure and the current density seems reasonable.(Figure 1)
However, when I increase the height of surrounding, the concentrated current density on the tip just disappear and change to the edges. (Figure 2)
I think it might change but not like this. I used the axisymmetric model in this case, and it remains the same if I change to 2D or 3D models.
Attachments:
Hello Yi-Chun Hu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.