Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Initial value?

Posted Oct 26, 2011, 6:56 a.m. EDT Parameters, Variables, & Functions Version 4.0a 2 Replies

Rod Habeshaw
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi Guys

Could anyone explain when is the initial value used with an example?

2 Replies Last Post Oct 26, 2011, 9:07 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 26, 2011, 8:59 a.m. EDT
Hi

at solver start, to see them (fill in the matrices), hit the "Solver - Dependent variables" node, right click and Compute to Seelcted. Then you see your initial state, and you can plot them out to inspcet and validate them

--
Good luck
Ivar
Hi at solver start, to see them (fill in the matrices), hit the "Solver - Dependent variables" node, right click and Compute to Seelcted. Then you see your initial state, and you can plot them out to inspcet and validate them -- Good luck Ivar
Rod Habeshaw
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 26, 2011, 9:07 a.m. EDT
Thanks a lot~
Thanks a lot~

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content