Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Setting Up a Gaussian or Plane Wave

Posted May 1, 2019, 2:36 p.m. EDT RF & Microwave Engineering, Wave Optics 2 Replies

Dipankar Mitra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to set up a Gaussian wave of 10 GHz. I am not quite sure how to do it. Any advice and suggestions will be highly appreciated.

I have attached file that how it should look like.

Thanks

Best, Dipankar

2 Replies Last Post May 24, 2019, 12:34 p.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago May 20, 2019, 4:54 p.m. EDT
Updated: 6 years ago May 20, 2019, 4:54 p.m. EDT

You can set up incident waves with a Gaussian cross-section in the Scattered Waves formulation, in the RF module, fairly easily. See the attached screenshot.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
You can set up incident waves with a Gaussian cross-section in the Scattered Waves formulation, in the RF module, fairly easily. See the attached screenshot.

Attachments:

Dipankar Mitra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago May 24, 2019, 12:34 p.m. EDT
Updated: 6 years ago May 24, 2019, 12:33 p.m. EDT

Hi Robert,

Thanks a lot. It works.

Best, Dipankar

Hi Robert, Thanks a lot. It works. Best, Dipankar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content