Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
helix with rectangular cross section.
Posted Oct 27, 2011, 10:07 p.m. EDT Geometry, Studies & Solvers Version 4.1, Version 5.2a 10 Replies
Please login with a confirmed email address before reporting spam
I need to know how to make a helical ribbon with rectangular cross-section.
thanks
Please login with a confirmed email address before reporting spam
Is this what you want? I made it by sweep a rectangle with a helix. If yes, I can upload the model.
Attachments:
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
I have a problem, I get the following message: "model created with a later version of comsol"
could you tell me how to make the helix? have you any tutorial?
Please login with a confirmed email address before reporting spam
First is create a rectangular in a work plane.
Second, make a parametric curve to represent the helix curve, like (cos(4*s),sin(4*s),s).
Last, sweep the rectangular with parametric curve. Pay attention to uncheck the "twist compensation".
Please login with a confirmed email address before reporting spam
your explanation was very successful, check it.
But I have other problem, i cant do difference between a cylinder and the agitator because disappears the figure.
I tried make a difference with each element and I realized that it can be for the sweep. I m not sure, have you any idea.
Thanks
P.D: Im doing a reactor and i want use rotating machinery model
Attachments:
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
Thanks..
Please login with a confirmed email address before reporting spam
Thanks in advance,
Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.
Suggested Content
- FORUM Self inductance of a rectangular straight wire
- BLOG Creating a Model Geometry in COMSOL Multiphysics®
- KNOWLEDGE BASE Graphics Window Not Responding on Computer with Intel Iris Xe Graphics Chip
- BLOG Analyzing Operating Mode Options for Helical Antennas
- FORUM Model Rectangular structure in 2D Axi-symmetric