Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculate R squared in Comsol

Posted May 22, 2019, 4:57 p.m. EDT Optimization, Results & Visualization Version 5.3a 1 Reply

Zhidong Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

If I have the measured and the computed curves in the same plot (see attached file), how can I calculate R^2 in Comsol? Thanks.

Best regards, Zhidong

Attachments:

1 Reply Last Post May 25, 2019, 7:03 a.m. EDT
Sven Friedel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago May 25, 2019, 7:03 a.m. EDT

Hi Zhidong Zhang

this could be done by a model method.

https://www.comsol.ch/blogs/how-to-use-model-methods-to-accelerate-your-comsol-workflow https://www.comsol.com/video/automating-your-modeling-workflow-with-model-methods-in-comsol

Best regards, Sven

Hi Zhidong Zhang this could be done by a model method. https://www.comsol.ch/blogs/how-to-use-model-methods-to-accelerate-your-comsol-workflow https://www.comsol.com/video/automating-your-modeling-workflow-with-model-methods-in-comsol Best regards, Sven

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content