Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Frequency response analysis of a damped piezoelectric resonator
Posted Jul 17, 2019, 4:28 p.m. EDT Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
I've been having a problem doing frequency response analysis for a quartz tuning fork. I was able to obtain a decent frequency response without any damping and it kinda forces the response to be a very sharp resonance with finer steps. I tried to add isometric damping similar to the shear stress quartz oscillator and it creates a nice response except at the resonance where there's a drop in its amplitude. I have no idea what is the cause of this problem. I have added an attachment of the responses with and without piezoelectric damping.
Attachments:
Hello Youssef Mahgoub
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.