Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Strange Microwaves heating results
Posted Nov 23, 2011, 12:03 p.m. EST RF & Microwave Engineering, Heat Transfer & Phase Change, Results & Visualization Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am simulating microwaves heating problem for two layers of oil and water joined together. Initially I put my microwaves source at the position of 0.4 meters and it gave me a maximum temperature of 112 degree Celsius after heating. Now I tried to optimize this heating effect by placing the microwaves source at different locations but it was giving me strange results.
Please find attached the word document showing all the results for source at different locations.
Can someone comment on it, why the trend is like that (so strange!!!)?
Any help will be highly appreciated.
Thanks.
I am simulating microwaves heating problem for two layers of oil and water joined together. Initially I put my microwaves source at the position of 0.4 meters and it gave me a maximum temperature of 112 degree Celsius after heating. Now I tried to optimize this heating effect by placing the microwaves source at different locations but it was giving me strange results.
Please find attached the word document showing all the results for source at different locations.
Can someone comment on it, why the trend is like that (so strange!!!)?
Any help will be highly appreciated.
Thanks.
Attachments:
1 Reply Last Post Nov 23, 2011, 12:04 p.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Sorry I forgot to mention that the lower layer is water while upper layer is oil...