Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Constructing an octahedron?

Posted Dec 4, 2019, 4:28 p.m. EST General, Geometry, Introduction 2 Replies

Skandan Chandrasekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do I construct an octahedron geometry?

2 Replies Last Post Dec 5, 2019, 2:38 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Dec 4, 2019, 5:31 p.m. EST
Updated: 5 years ago Dec 4, 2019, 12:33 p.m. EST

See this old thread.

Best,

Jeff

-------------------
Jeff Hiller
See [this old thread](https://www.comsol.com/forum/thread/157341/randomized-hexagon-using-model-methods?last=2017-10-17T21:27:02Z). Best, Jeff
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Dec 5, 2019, 2:38 a.m. EST
Updated: 5 years ago Dec 5, 2019, 3:00 a.m. EST

Hi Skandan,

In the latest release, COMSOL Multiphysics 5.5, the Part Libraries include an octahedron as well as all other Platonic solids.

See also https://www.comsol.com/blogs/how-to-use-the-platonic-solids-as-geometry-parts-in-comsol/.

Best regards,

Magnus Ringh, COMSOL

Hi Skandan, In the latest release, COMSOL Multiphysics 5.5, the Part Libraries include an octahedron as well as all other Platonic solids. See also . Best regards, Magnus Ringh, COMSOL

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content