Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MicroMixer

Posted Dec 15, 2011, 2:30 a.m. EST Fluid & Heat, Microfluidics Version 4.2a 0 Replies

COMSOL user2
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello ,

Thanks for help in advance.

I'm trying to mix two chemical compounds in water. The mixing chamber is connected to a few microfluidic channels.

I already did a few simulations based on "Laminar Flow" and "Transport of Diluted Species" by applying "pressure" with different concentrations to each inlet.

I checked through "stationary" step that how well the mixing occurs in "concentration" result. It looks good.

But I do not know how to simulate "how fast this mixing occurs". The timing is a key factor in this simulation.

To do this simulation, what I'm supposed to apply and see?

Thanks.

0 Replies Last Post Dec 15, 2011, 2:30 a.m. EST
COMSOL Moderator

Hello COMSOL user2

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content