Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vector components at angle, 30 degree?

Posted Dec 19, 2011, 11:21 a.m. EST Low-Frequency Electromagnetics, Geometry, Parameters, Variables, & Functions Version 4.0a 1 Reply

Cesar Bustos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear COMSOL expertise

In 2D AC/DC, I am trying to simulate the magnetic field of the ring magnet.
But this ring magnet consists of 6 arc segments. So I need to apply Br to each segment at intervals of 30 degree.

Then with r, z and phi component, How could I apply change the angle?

Thanks for your comments in advance!

Regards
1 Reply Last Post Dec 20, 2011, 3:22 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 20, 2011, 3:22 a.m. EST
Hi

what about using a Definitions - Coordinate Systems - Cylindrical coordinates ?

--
Good luck
Ivar
Hi what about using a Definitions - Coordinate Systems - Cylindrical coordinates ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content