Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Solving maxwell equation

Posted Dec 28, 2011, 12:42 a.m. EST RF & Microwave Engineering Version 4.2a 2 Replies

Nhat Nam Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I just begin to use COMSOL version 4.2a for solving Maxwell equations in lightning transient problems (calculate electric and magnetic field caused by lightning stroke). Which is the suitable Physics I have to use for these problem?
Thank you!
2 Replies Last Post Dec 28, 2011, 5:49 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 28, 2011, 3:37 a.m. EST
Hi

there is somewhere one or more examples for an arc (there are also some articles in the conf section of the main site), this might help ypu too ;)

--
Good luck
Ivar
Hi there is somewhere one or more examples for an arc (there are also some articles in the conf section of the main site), this might help ypu too ;) -- Good luck Ivar
Nhat Nam Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 28, 2011, 5:49 a.m. EST
Thank you very much, Mr. Ivar.
Thank you very much, Mr. Ivar.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content