Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to save log file in transient simulation?

Posted Jan 1, 2012, 11:57 p.m. EST Studies & Solvers Version 4.0, Version 4.0a, Version 4.1, Version 4.2, Version 4.2a 3 Replies

Rakesh Dhote
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

HI,

I want to study the time increments taken by the transient solver during solving.
This information is written in log file. However, I don't know the exact location of log file.

Would you please let me know, how to access this information in text file?

Thanks,
Rakesh
3 Replies Last Post Jan 4, 2012, 4:44 p.m. EST
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 2, 2012, 9:33 a.m. EST
If you select the Time-Dependent Solver node (or any other solver) you will find the info that you need under the Log tab.
If you select the Time-Dependent Solver node (or any other solver) you will find the info that you need under the Log tab.
Rakesh Dhote
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 2, 2012, 8:07 p.m. EST
Comsol only saves last 5000 time step information in the log tab.

If the simulation takes several thousand time steps, the first time steps information is scrapped and only last 5000 times steps are available.

Is there any way to output the timesteps to text file in Comsol interface? or any way to find the location of log file?
Comsol only saves last 5000 time step information in the log tab. If the simulation takes several thousand time steps, the first time steps information is scrapped and only last 5000 times steps are available. Is there any way to output the timesteps to text file in Comsol interface? or any way to find the location of log file?
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 4, 2012, 4:44 p.m. EST
Try increasing the maximum size allocated by COMSOL for the log file. You will find that value in the menu under Options>Preferences>General>Log window size (characters). The default is 300,000 characters.
Try increasing the maximum size allocated by COMSOL for the log file. You will find that value in the menu under Options>Preferences>General>Log window size (characters). The default is 300,000 characters.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content