Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

double layer capacitance

Posted Jan 2, 2012, 9:34 p.m. EST Low-Frequency Electromagnetics, MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Parameters, Variables, & Functions Version 4.2 3 Replies

Bahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi everybody

I am going to model double layer capacitance in my system.
Can anybody introduce some models, tutorials, or any hints about modeling double layer?

Best
Bahar
3 Replies Last Post Jan 22, 2012, 3:57 p.m. EST
Paolo Mazzucchi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 20, 2012, 12:22 p.m. EST
Hi Bahar,
did you find a model or some tutorials to solve this problem? I'm going through this problem and i'll appreciate if you coul help me.

Thank you

Best

Mazzucchi
Hi Bahar, did you find a model or some tutorials to solve this problem? I'm going through this problem and i'll appreciate if you coul help me. Thank you Best Mazzucchi
Hitesh Kumar Sahoo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 22, 2012, 12:11 p.m. EST
Hi

I found this on COMSOL resources. If you havent come across then, here is the link : www.comsol.com/papers/7925/
Hi I found this on COMSOL resources. If you havent come across then, here is the link : http://www.comsol.com/papers/7925/
Bahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 22, 2012, 3:57 p.m. EST
Hi

Sorry for my late reply.

I haven't found anything special. The only one that I have found is the link that "Hitesh" had posted here and it was not that helpful for me.
What I a doing right now is considering charges by myself to find out if i can model DL from the scratch.
Hi Sorry for my late reply. I haven't found anything special. The only one that I have found is the link that "Hitesh" had posted here and it was not that helpful for me. What I a doing right now is considering charges by myself to find out if i can model DL from the scratch.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content