Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plot result in a cylindrical coordinate
Posted Apr 7, 2020, 7:59 p.m. EDT Structural & Acoustics, Geomechanics, Results & Visualization Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hello, I want to visualize the stress tensor in the cylindrical coordinate. Currently, I have the output from a 3D solid mechanical model. The expression I choose is solid.sx, solid.sy, solid.sz and etc. However, these are all plotted in the global cooridinate. I want to visualize the result in the cylindrical coordinate.
I also tried to define a cylindrical system and selected it in the linear elastic material (solid mechanics). And then visualize the result in solid.slxx, solid.slyy and etc. But the thing is: the stiffness matrix I input for anisotropic material is based on the global coordinate. So if I selected the cylindrical system in the linear elastic material (solid mechanics), the calculated result give me a wrong output.
SO I want to know whether there are some other ways to visualize the stress in the cylindrical coordinate.
Hello Wenjing Wang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.