Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Warning exists during Form Union

Posted Apr 20, 2020, 10:03 a.m. EDT Geometry Version 5.5 1 Reply

Erfu Wu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I met a problem by forming an union: when I try to form a union, half of the geometry is removed (2D model, r<0 is removed, axis symmetric), what should I do for this ?

Attachments:

1 Reply Last Post Apr 20, 2020, 12:28 p.m. EDT
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Apr 20, 2020, 12:28 p.m. EDT
Updated: 5 years ago Apr 20, 2020, 12:28 p.m. EDT

Erfu,

This is because you are using 2D Axisymmetruc geometry, which cannot have any objects to the left of axial symmetry axis.

For 2D geometry, geometrical objects can be placed at x<0.

Regards,

Sergei

Erfu, This is because you are using 2D Axisymmetruc geometry, which cannot have any objects to the left of axial symmetry axis. For 2D geometry, geometrical objects can be placed at x

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content