Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

reaction rate for physical absorption

Please login with a confirmed email address before reporting spam

I am using Comsol Multiphysics 3.5a to model a physical absorption. I chose the che chemical engineering module/ mass transport/ convection and diffusion. I want to know how to set the reaction rate in Sumdomian settings for physical absorption? Hope any professional friends can give me some help. Thans a lot!

1 Reply Last Post May 14, 2012, 2:45 a.m. EDT
COMSOL Moderator

Hello Yunshan l

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 14, 2012, 2:45 a.m. EDT
Hi Yunshan,

I'm using comsol for modeling Dielectric barrier discharge.I have a problem in inputting reaction too.May be you can help me.
For plasma the initial condition is that it be neutral but when i have some ions and i want to set this condition , i set initial value all ions equal electron but comsol cant not be run and i don't know how do must i.
please if you can reply me.
Best regard,
Azadeh
Hi Yunshan, I'm using comsol for modeling Dielectric barrier discharge.I have a problem in inputting reaction too.May be you can help me. For plasma the initial condition is that it be neutral but when i have some ions and i want to set this condition , i set initial value all ions equal electron but comsol cant not be run and i don't know how do must i. please if you can reply me. Best regard, Azadeh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.