Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Regarding a multiple heat flux boundary condition
Posted May 8, 2020, 10:06 a.m. EDT Computational Fluid Dynamics (CFD), Heat Transfer, LiveLink for MATLAB Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
I am using COMSOL with MATLAB Livelink on a cluster. Now in MATLAB I get say 10 Heat Flux values for 10 concentric rings on a surface which I need to pass on to COMSOL for further heat transfer analysis. But the COMSOL model has more meshes than 10 (total mesh points on the surface boundary are 1800+ - 'Normal' physics controlled mesh used). How can I specify heat flux for all those data points on the same surface for COMSOL? I need to basically interpolate the 10 heat fluxes into a lotmore according to the mesh on the boundary and those should be the heat flux input for the COMSOL model.
Hello Arijit Upadhyay
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.