Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Singularities in the mesh of a rotating machinery model.

Posted Feb 17, 2012, 4:18 p.m. EST Low-Frequency Electromagnetics Version 4.2a 0 Replies

John R Puentes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am running a time dependent simulation in the Rotating machinery-laminar flow module.The simulation attemps to show the mixing process of a fluid in a mixer with different geometries.For my first model, I used a cylindrical geometry for the cointainer and the simulation worked. However, when I used a conical geometry the simulation did not converge and the follow warning came up:


The model may have a singularity. New constrain force nodes detected. These are not stored.

Does anybody know how can I solve this problem?

Thanks
0 Replies Last Post Feb 17, 2012, 4:18 p.m. EST
COMSOL Moderator

Hello John R Puentes

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content