Lars Gregersen
COMSOL Employee
Please login with a confirmed email address before reporting spam
Posted:
4 years ago
Jul 1, 2020, 4:49 a.m. EDT
Updated:
4 years ago
Jul 6, 2020, 9:35 a.m. EDT
If you have a 3D surface plot you can right click and choose Add Plot Data to Export. Here you get the option of exporting to VTK, STL, PLY and 3MF.
You can also right click on a 3D plot group and choose Add Image to Export and choose to export as glTF.
I'm sure most 3D programs can read at least one of these file formats.
-------------------
Lars Gregersen
Comsol Denmark
If you have a 3D surface plot you can right click and choose Add Plot Data to Export. Here you get the option of exporting to VTK, STL, PLY and 3MF.
You can also right click on a 3D plot group and choose Add Image to Export and choose to export as glTF.
I'm sure most 3D programs can read at least one of these file formats.
Please login with a confirmed email address before reporting spam
Posted:
4 years ago
Jul 3, 2020, 3:58 a.m. EDT
Thank you for your reply. I will try following your advice.
Thank you for your reply. I will try following your advice.
Please login with a confirmed email address before reporting spam
Posted:
4 years ago
Jul 6, 2020, 4:25 a.m. EDT
Dear Gregersen
I followed your suggestions but it did not work to solve my problem. My problem is to export of 2D surface plot from comsol to tecplot graphics.
thanking you
Dear Gregersen
I followed your suggestions but it did not work to solve my problem. My problem is to export of 2D surface plot from comsol to tecplot graphics.
thanking you