Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The field strength referenced under the current field appears to be zero

Please login with a confirmed email address before reporting spam

The two boundary of the two-dimensional model are fixed electric potential, the conductivity of the material is defined as the change with the field intensity.But,empty matrix appears in the simulation.Change "E" to "E+1" in the conductivity formula, I can simulate the result,but there is no the situation that "E=0".What is the problem?!


1 Reply Last Post Dec 19, 2020, 11:30 a.m. EST
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Dec 19, 2020, 11:30 a.m. EST

I suggest you post your model to the forum.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
I suggest you post your model to the forum.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.