Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

DESIGN OF ACCELEROMETER

Posted Apr 19, 2012, 2:59 a.m. EDT 1 Reply

Saloni Chaurasia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I am facing a problem while analysing a T shaped beam fixed at the T shaped cross section with a lateral load applied parellel to its flat top surface .It showing a compilation and syntax error .
Please help me out ASAP.Also find attached snap shot of the model with the concerned problem.

Attachments:

1 Reply Last Post Apr 19, 2012, 6:00 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 19, 2012, 6:00 a.m. EDT
Hi

it looks like you have an empty field for an expression somewhere, or an empty reference, check your BC and their inputvalues. But it's only a guess, it could be something special

--
Good luck
Ivar
Hi it looks like you have an empty field for an expression somewhere, or an empty reference, check your BC and their inputvalues. But it's only a guess, it could be something special -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content