Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Square wave AC source in AC/DC module for a transient simulation
Posted May 8, 2012, 6:37 a.m. EDT Low-Frequency Electromagnetics, Studies & Solvers Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
It looks like there is only sine wave input available. One could use diodes to cut the
waveform to make it a square. But that seems to lead for difficulties to find a numerical solution
in simulations. In general I would need a pulse width modulated signal. How
this could be done in Multiphysics ? A good example would be the best advise. I'm still searching
a better documentation for the Spice import feature.
1 Reply Last Post May 8, 2012, 8:02 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you can combine functions in v4.2a, and for certain you can add the "make periodic" such that a square pulse with rounded corners in aperiodic way is possible, worst case try to pass via an analytical function
--
Good luck
Ivar
you can combine functions in v4.2a, and for certain you can add the "make periodic" such that a square pulse with rounded corners in aperiodic way is possible, worst case try to pass via an analytical function
--
Good luck
Ivar