Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PML for 2D model in pressure acoustics

Posted May 9, 2012, 3:33 a.m. EDT Version 4.2a 0 Replies

XJ Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I recently encountered a problem where I need to calculate the eigen modes of a rectangular waveguide with a side rectangular cavity sandwiched by two PML regions. I tried the built-in PML in definitions, but they don't seem to work very well and I get very weird pressure field distribution. The PML regions are not the way that they're supposed to be. It should be very simple, but I just can't get the result I wanna. So I am just wondering if there is any special techniques that I need to use when setting up the PMLs. thanks.

XJ ZHang
0 Replies Last Post May 9, 2012, 3:33 a.m. EDT
COMSOL Moderator

Hello XJ Zhang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content