Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

What does the c in chcs.c_wH2 mean?

Posted May 16, 2012, 9:43 a.m. EDT Parameters, Variables, & Functions Version 4.2a 2 Replies

Alex Bates
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I know chcs refers to the transport of concentrated species module and wH2 is referring to a set parameter but, what does the c_ mean?
2 Replies Last Post May 16, 2012, 11:29 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 16, 2012, 10:58 a.m. EDT
Hi

have you tried to enable the "equation view" and checked what COMSOL says for the variable description ?

--
Good luck
Ivar
Hi have you tried to enable the "equation view" and checked what COMSOL says for the variable description ? -- Good luck Ivar
Alex Bates
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 16, 2012, 11:29 a.m. EDT
I did but, I looked where the variable was used and not where it originated. Now I've found it, molar concentration.

Thank you for the response.
I did but, I looked where the variable was used and not where it originated. Now I've found it, molar concentration. Thank you for the response.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content