Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plotting result

Posted May 23, 2012, 3:31 a.m. EDT Version 4.2a 1 Reply

Martin Hediger
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear COMSOL Users
I have evaluated the electrostatic potential on a 2D disc and I find a circular symmetrical profile. Now I would like to plot the potential against the radius. How can I obtain a cross section through the disc?

Thanks for hints.
Martin
1 Reply Last Post May 23, 2012, 3:45 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 23, 2012, 3:45 a.m. EDT
Hi

by different ways:

1) use a Data Set Cut Line on your results or
2) cut your geoemtry and select the line and do a line plot or
...

--
Good luck
Ivar
Hi by different ways: 1) use a Data Set Cut Line on your results or 2) cut your geoemtry and select the line and do a line plot or ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content