Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Phase-field simulation of phase separation

Posted May 25, 2012, 12:15 p.m. EDT Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 3.5a, Version 4.2a 0 Replies

Sha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi

I am looking at simulating a phase evolution. What I'm trying to do is very similar to the demo tutorial for the phase field module: www.comsol.eu/products/tutorials/phasefield_35/.

However, in this specific tutorial, the two individual liquids are equal in volume (1:1). I would want to simulate the same phenomenon with two liquids in the ratio (2:1), i.e I want the mixture to contain one liquid in more quantity than the other. Can you please let me know what parameter should I change?...
--
sha
0 Replies Last Post May 25, 2012, 12:15 p.m. EDT
COMSOL Moderator

Hello Sha

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content