Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Limit dependent Variables

Posted Jun 4, 2012, 6:18 a.m. EDT Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.1 2 Replies

David Droste
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey COMSOL-Experts,

I want to limit the dependent variable s for an intervall ( 0<s<1). How do I do this in COMSOL 4.1?

Thanks for help.

Best regards
David

2 Replies Last Post Feb 21, 2016, 7:49 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 4, 2012, 6:52 a.m. EDT
Hi

For posprocessing or solving

for solving I would say via some clever BC set-up depending on the type of variable,s, physics etc

for postprocessing, either using the filter or a "data-set" operation

--
Good luck
Ivar
Hi For posprocessing or solving for solving I would say via some clever BC set-up depending on the type of variable,s, physics etc for postprocessing, either using the filter or a "data-set" operation -- Good luck Ivar
Yuhong Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Feb 21, 2016, 7:49 a.m. EST

Hi

For posprocessing or solving

for solving I would say via some clever BC set-up depending on the type of variable,s, physics etc

for postprocessing, either using the filter or a "data-set" operation

--
Good luck
Ivar


Hi Ivar,

Could you please give me more details about the clever BC set-up dependent on the type of variable, s, for solving? In my model coupled diluted species transport moduel and a user-defined general PDE, where the dependent variables are "cm" and "um", I want to set the limit 0<um<0.7. The two physics fields are caculated in different domains seperately but coupled via a mass flux at the liquid-gas interface. What can I do?

Thanks in advance.

yuhong
[QUOTE] Hi For posprocessing or solving for solving I would say via some clever BC set-up depending on the type of variable,s, physics etc for postprocessing, either using the filter or a "data-set" operation -- Good luck Ivar [/QUOTE] Hi Ivar, Could you please give me more details about the clever BC set-up dependent on the type of variable, s, for solving? In my model coupled diluted species transport moduel and a user-defined general PDE, where the dependent variables are "cm" and "um", I want to set the limit 0

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content