Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to make animation

Posted Jun 29, 2021, 10:30 a.m. EDT Plasma Physics, General, Results & Visualization 1 Reply

Kangfu Troye
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the transient simulation, use the obtained solution to make an animation, how to make the physical quantity scale of the animation change along with the animation

1 Reply Last Post Jul 5, 2021, 8:20 p.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Jul 5, 2021, 8:20 p.m. EDT

The scales of plotted quantities in animations can be set by the separately-cited plots that are used in their creation; they will usually scale automatically if your individual plots do, but you have some additional control when you prepare the animation. Go to Results --> Export --> Animation, and select the Animation (it should be there, if you created it the usual way). Under Settings, scroll down to Advanced, and there you will find a checkbox that says "Synchronize scales between frames." You may want to set (or unset) that check-box. I hope that accomplishes your objective.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
The scales of plotted quantities in animations can be set by the separately-cited plots that are used in their creation; they will usually scale automatically if your individual plots do, but you have some additional control when you prepare the animation. Go to Results --> Export --> Animation, and select the Animation (it should be there, if you created it the usual way). Under Settings, scroll down to Advanced, and there you will find a checkbox that says "Synchronize scales between frames." You may want to set (or unset) that check-box. I hope that accomplishes your objective.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content