Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Two injection points/circuits

Posted Jun 13, 2012, 3:18 a.m. EDT Low-Frequency Electromagnetics Version 4.2a 0 Replies

Marios Karaoulis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am using the AC/DC module, in 3D domain. I want to simulate a circuit, where I inject on one point A1 +1A, and retrieve B1 -1A on another point. Up to this point ok.

But if I need to simulate two circuits, meaning two injection points (A1 and A2) and two retrieval points (B1 and B2), how could define each pair?

In other words, A1 is associated with B1, and A2 with B2. If I define 4 point current sources (A1 and A2 with +1A , B1 and B2 with -1A), it is not a circuit.

Best
0 Replies Last Post Jun 13, 2012, 3:18 a.m. EDT
COMSOL Moderator

Hello Marios Karaoulis

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content