Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

concrete column

Posted Aug 9, 2021, 2:56 a.m. EDT Structural Mechanics 0 Replies

wey Stephen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

A concrete column is made. When only solid elastoplasticity is added, the results can be calculated, but when a truss module is added, the following errors appear. A generalized tension is applied to the concrete, and then the prestressed displacement of the truss is connected with the concrete. I don't know if there is any error in this setting, and how to modify the model.

-Geometry: geom1

-Domain: 3

Failed to evaluate variable.

-Variable: comp1.solid.eiel23

-Defined as: comp1.solid.epl23

Failed to evaluate variable.

-Variable: comp1.solid.eel23

-Defined as: comp1.solid.el23-comp1.solid.eiel23

Failed to evaluate variable.

-Variable: comp1.solid.sl23

-Defined as: (2 * Comp1. Solid. D55) * comp1.solid.eel23

Failed to evaluate expression.

-Expression: D ((- Comp1. Solid. Sl11 * test (Comp1. Solid. El11) - 2 * Comp1. Solid. SL12 * test (Comp1. Solid. El12) - 2 * Comp1. Solid. Sl13 * test (Comp1. Solid. El13) - Comp1. Solid. Sl22 * test (Comp1. Solid. El22) - 2 * Comp1. Solid. Sl23 * test (Comp1. Solid. El23) - Comp1. Solid. Sl33 * test (Comp1. Solid. El33)) * (dvol){ test@4 })

Could not evaluate Jacobian matrix of expression.

-Expression: (- Comp1. Solid. Sl11 * test (Comp1. Solid. El11) - 2 * Comp1. Solid. SL12 * test (Comp1. Solid. El12) - 2 * Comp1. Solid. Sl13 * test (Comp1. Solid. El13) - Comp1. Solid. Sl22 * test (Comp1. Solid. El22) - 2 * Comp1. Solid. Sl23 * test (Comp1. Solid. El23) - Comp1. Solid. Sl33 * test (Comp1. Solid. El33)) * (dvol) Thank you for your answer

0 Replies Last Post Aug 9, 2021, 2:56 a.m. EDT
COMSOL Moderator

Hello wey Stephen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content