Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Replicating a work plane

Posted Jun 19, 2012, 7:12 a.m. EDT MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Geometry Version 4.2a 1 Reply

Ayush Arpit Garg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm modelling a multi layer structure in which each layer is identical to the rest. I need to know a method so that I could replicate one work plane to the others without needing to build all the entities again and again to the subsequent work planes.
1 Reply Last Post Jun 22, 2012, 6:15 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 22, 2012, 6:15 a.m. EDT
Hi

cant you replicate one object after the other, or use the layer feature in the 3D block or shape nodes (advanced tab)

--
Good luck
Ivar
Hi cant you replicate one object after the other, or use the layer feature in the 3D block or shape nodes (advanced tab) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content