Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculate & compare two separate simulations on the same geometry

Please login with a confirmed email address before reporting spam

I have done a laminar flow simulation (including the inertial term), and now would like to do the same simulation (identical geometry, meshing, boundary conditions) with the inertial term neglected.

Then I would like to compare the two solutions by creating the difference (DataSets-Join shoud do that) and plot the result as a 3D-Slice.

How do I go about calculationg two seperate solutions in the same Model?

Thank you.

1 Reply Last Post Jun 21, 2012, 11:15 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 21, 2012, 11:15 a.m. EDT
Hi

have you checked the data set join (or is it only in v4.3 ?)

--
Good luck
Ivar
Hi have you checked the data set join (or is it only in v4.3 ?) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.