Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error in simulation for acoustic cloaking

Posted Jun 26, 2012, 7:18 a.m. EDT Acoustics & Vibrations 1 Reply

Varun Kakar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to simulate for acoustic cloaking in Comsol 4.2.but there are some errors. I cant understand how to remove those errors. I have attached the screenshot of comsol error here.
Please help me out..

Attachments:

1 Reply Last Post Jun 26, 2012, 1:11 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 26, 2012, 1:11 p.m. EDT
Hi

are you sure you have defined a frequency in the frequency domain solver ?, that is what I suppose from the error, but it's difficult to really know only from that snapshot ;)

--
Good luck
Ivar
Hi are you sure you have defined a frequency in the frequency domain solver ?, that is what I suppose from the error, but it's difficult to really know only from that snapshot ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content