Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calling temperature and pressure data from study in variables.

Posted Jun 30, 2012, 1:59 p.m. EDT Materials Version 4.3 0 Replies

Kevin Smith
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In my model I have several variables in the global definitions module that call pressure and temperature. But they aren't found and throw up jacobian matrix errors before the solver will initiate. What do I need to do for these inputs? I just called the values that are changing as constants to see if that would help, it runs but dosen't give any useful data. Attached is the model.

Attachments:

0 Replies Last Post Jun 30, 2012, 1:59 p.m. EDT
COMSOL Moderator

Hello Kevin Smith

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content